JBM 60047C Manual De Instrucciones página 6

EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This tool has been designed to drill holes on
different types of materials.
It can carry out drilling tasks in wood and me-
tal and drilling impact tasks, more common in
masonry, in concrete, stone and red brick.
Also, it can tighten, loosen or remove nuts and
screws. To do this, it has an adjustment ring
that allows you to choose among 20 different
torque settings.
It has a speed selector and a forward/reverse
selector to set the rotation direction to left or
right. This selector, if placed on its middle po-
sition, blocks the trigger switch to prevent an
accidental starting of the tool.
It is equipped with a LED light for better visua-
lisation of the working area.
As accessories it has a belt hook and an auxi-
liary handle for an improved grip.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before
using the product.
Failure to comply with these instructions could
result in personal injury and/or damage
to the product.
Please keep the instructions for future referen-
ce.
Workplace security
Keep the area clean and well lit. Cluttered or
dark areas can cause accidents.
Do not use power tools in explosive environ-
ments (for example in the presence of flam-
mable
liquids, gases or dust). Power tools create
sparks which may ignite flammable elements.
Keep children and people away during the use
of the tool. Distractions can cause you to
lose control of the tool.
Electrical safety
Do not expose power tools to rain. The pene-
tration of water into the tool increases the risk
of electric shock
Personal safety
Do not use a tool when you are tired or under
the influence of drugs, alcohol or medication.
A moment of distraction while using a tool can
cause serious personal injury
Use safety equipment.
Always wear eye protection.
Wear ear protection.
Avoid accidental starting. Make sure that the
trigger lock is set in its correct position before
inserting the battery or transporting the tool.
Carrying tools with your finger on the trigger
can cause accidents.
Remove any adjusting key before turning the
tool on.
Do not rush. Always maintain proper footing.
This allows better control of the tool in unex-
pected situations.
Dress appropriately. Do not wear loose clo-
thing or jewellery, they could get caught in the
moving parts of the tool.
· 6 ·
REF.60047C