Idiomas disponibles
Idiomas disponibles
EN - RS/JIG
Thank you for purchasing this Trend product,
we hope you enjoy many years of creative and
productive use.
TECHNICAL DATA
Rail length
Rail width
Rail thickness
Footprint
Material width
Material length
Guide bush size
Cutter diameter
Weight
Max. router weight
The following symbols are used throughout this
manual.
Refer to the instruction manual of your
power tool.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions.
This unit must not be put into service until it
has been established that the power tool to
be connected to this unit is in compliance with
2006/42/EC (identified by the CE marking on the
power tool).
INTENDED USE
This jig is intended for use with a plunge router
with suitable guide bush and router cutter fitted
to surface wood based materials.
SAFETY
Please read and understand the safety points
in these instructions as well as you power tool
instructions.
RS/JIG
511mm
51mm
12mm
1022 x 540mm
Max. 400mm
Max. 910mm
30mm
Max. 19.1mm
2.9 kg
7 kg
- 6 -
EN - RS/JIG
PLEASE KEEP THESE
INSTRUCTIONS IN A SAFE PLACE.
Safety Points
1.
Disconnect power tool attachment from
power supply when not in use, before
servicing, when making adjustments and
when changing accessories such as cutters.
Ensure switch is in "off" position and cutter
has stopped rotating.
2.
Read and understand instructions supplied
with power tool, attachment and cutter.
3.
Current Personal Protective Equipment
(PPE) for eye, ear and respiratory protection
must be worn. Keep hands, hair and clothes
clear of the cutter.
4.
Before each use check cutter is sharp and
free from damage. Do not use if cutter is
dull, broken or cracked or if any damage is
noticeable or suspected. Only use tools for
woodworking to EN847 safety standard.
Ensure cutting tool is suitable for application.
5.
The maximum speed (nmax) marked on
tool or in instructions or on packaging shall
not be exceeded. Where stated, the speed
range should be adhered to.
6.
Insert the shank into the router collet at
least all the way to the marked line indicated
on the shank. This ensures at least 3⁄4 of
the shank length is held in collet. Ensure
clamping surfaces are clean.
7.
Check all fixing and fastening nuts, bolts
and screws on power tool, attachment and
cutting tools are correctly assembled, tight
and to correct torque setting before use.
8.
Ensure all visors, guards and dust extraction
is fitted.
9.
The direction of routing must always be
opposite to the cutter's direction of rotation.
10. Do not switch power tool on with the cutter
touching the workpiece.
11. Trial cuts should be made in waste material
before starting any project.
12. Repair of tools is only allowed according to
tool manufacturers instructions.
13. Do not take deep cuts in one pass, take
shallow passes to reduce the side load
applied to the cutter.
14. User must be competent in using
woodworking equipment before using our
products. Dress properly, no loose clothing/
jewellery, wear protective hair covering for
long hair.
15. Consider working environment before
using tools. Ensure working position is
comfortable and component is clamped
securely. Keep proper footing and balance at
