Oster GCSTBS-100 Manual De Instrucciones página 16

3. Take the water tank to a sink. Pull the rubberized water-fill cover to open and pour tap
water from the faucet into the water-fill opening until it reaches the Max water level in
water tank (Figure 2). If water spills outside of the tank, or within the center water tank
cavity, wipe it dry with a paper towel or cloth.
Warning: When filling the water tank, watch for water that can drip onto the floor and
cause you to slip and fall.
Tip: It is not necessary to have a full tank of water for the Steamer to generate steam.
For best results, just make sure the water tank is at least half full.
4. Close the water-fill cover, insert the handle into the water tank and turn clockwise
until the arrow on the handle aligns with the lock symbol ( ) on the tank. Pull on the
handle to ensure it is fully locked in position.
Note: If you need to add water while steaming, unplug the steamer, wait until it cools
and follow above steps. If a loud vibrating noise is heard, then the water level is low
and needs to be refilled.
ATTACHING AND REMOVING ACCESSORIES
To attach: Grasp both sides of the accessory and insert the heated press bar
•
opening at the top of the accessory, behind the small tab above the heated press bar
then gently press accessory onto steamer head until it snaps into place.
To remove: Grip accessory handle and gently pull toward you to separate from the
•
steam head (Figure 3).
Figure 2
Figure 3
English - 5