neno Aqua Manual Del Usuario página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
c. For your family's safety, when you select the keep warm and finish function, the coffee machine runs for a maximum of 24 hours. After 24 hours, the machine will
automatically switch off.
2. Boiling water
Select the boil water function on the screen and press the + or - button to set the heating temperature. When you have set the temperature the unit will make a short beep, the
icon will blink twice and boil water will start.
a. When the water boil function is on, the appliance automatically heats the water to 100°C. If the water temperature is above or below the set temperature, the appliance
will allow the water to cool naturally and the water boil function will switch off. Press the keep warm button to automatically switch to the keep warm function.
b. For your family's safety, once the keep warm function has been selected and you have finished, the coffee machine runs for a maximum of 24 hours. After 24 hours the
machine will automatically switch off itself.
3. Cooling
Select the auto/fan (chill) function button on the display. When switched on, the unit will make a short beep, the temperature icon will blink 2 times and the unit will start cooling
the water. When the actual water temperature is higher than the selected temperature, the unit will switch on the fan and cool the water and maintain the temperature.
a. When the water temperature is below the selected temperature, the unit will boil the water to 100°C, make a short beep and then turn on the fan to quickly cool the
water to the set temperature and maintain it.
b. For your family's safety, when you select the keep warm and finish function, the coffee machine runs for a maximum of 24 hours. After 24 hours, the machine will
automatically switch off.
4. Water
The boil (boil water) button has the following settings:
a. When the water button is pressed, the coffee machine pours 50ml at a time.
a. To pour water, press and hold the water button, the unit will make a short beep and start running, to stop the water release the button.
5. Memory
When keep warm and boil are activated, the appliance screen will show the last set temperature; when keep warm and boil are activated again, the appliance will return to the
factory temperature settings.
05. CLEANING & MAINTENANCE
CAUTION:
1. Clean the appliance immediately after every use.
2. Do not immerse the main body in water.
3. Do not use bleaching or chemical solution/tablets for the appliance.
4. Do not use steel wool, abrasive cleaners, or corrosive liquid (such as petrol, acetone, or alcohol) to clean the appliance.
5. Do not lift or move the appliance when in use.
6. Do not let the power cord hang from the table or touch hot objects.
CLEANING METHOD:
1. Disconnect the power.
2. Remove the tank cover.
3. Pour out the water from the tank.
4. Wipe the tank with a dry towel or a dry cotton cloth.
Note: If there is still residual heat after use, wait 10 minutes before cleaning it.
06. DESCALING THE APPLIANCE
The scale should be removed every week to ensure 100% working efficiency. Regular cleaning can help reduce accumulation of scale. When disposing of food residues and limescale
from the water container:
Note:
1. Mix a small packet of citric acid (about 10 grams) with distilled water (about 100ml) and pour into a water container or use a mixture of 100ml boiled water and 30ml vinegar
(8%).
2. Press the boil button to start working and disconnect the appliance after it is finished.
3. Pour out the acetic acid (or vinegar) solution and wipe the surface of the tank with a dry towel or cotton cloth.
4. Use a towel or a cotton cloth to wipe the heating plate several times until it is clean.
5. Keep the tank as dry as possible to prevent bacterial growth.
07. FAULT ANALYSIS AND DIAGNOSIS
The chapter summarizes the most common problems. If you have any questions concerning the appliance, please contact the customer service centre.
Fault
The machine does not heat up
"E3" appears on the digital screen
The machine does not turn on
08. WARRANTY CARD
Dear customer, thank you for purchasing our Neno Aqua modified milk machine. If you have any problems with the operation of the machine under normal conditions, please
contact an authorised service centre.
Keep your warranty card in case you need repairs. The product is covered by a 24-month warranty.
Warranty terms and conditions can be found at: https://neno.pl/gwarancja
For details, contact adress service, please visit: https://neno.pl/contact/?lang=en
Specifications and contents are subject to change without notice. We apologise for any inconvenience.
DE
BEDIENUNGSANLEITUNG
Sehr geehrter Kunde,
vielen Dank, dass Sie sich für die Neno Aqua modifizierte Milchmaschine entschieden haben. Bitte lesen Sie die Bedienungsanleitung vor dem Gebrauch durch und bewahren Sie sie
für den Fall auf, dass Sie die Maschine erneut verwenden müssen. Die Abbildungen dienen nur als Beispiele.
01. SICHERHEIT
1. Prüfen Sie, ob die auf der Unterseite des Geräts angegebene Spannung mit der örtlichen Eingangsspannung übereinstimmt, bevor Sie das Gerät anschließen.
2. Verwenden Sie das Gerät nicht, wenn der Stecker, das Netzkabel oder das Gerät selbst beschädigt ist.
3. Wenn das Netzkabel beschädigt ist, wenden Sie sich an eine autorisierte Kundendienststelle.
4. Kinder sollten nicht mit dem Gerät spielen oder das Gerät unbeaufsichtigt benutzen.
Analysis
Check: is the thermostat disconnected?
Check: Is the temperature set lower than the actual water
temperature?
Check: Is the water tank out of water?
Check: Is the water tank out of water?
Solving methods
Wait for the machine to cool down and then restart it.
Follow the instructions to set the temperature.
Add more water
Add more water
7
loading

Productos relacionados para neno Aqua