Idiomas disponibles
Idiomas disponibles
Speed UP
Speed Down
Operation mode
Timer on/off
4.4 OPERATING INSTRUCTIONS
1. Plug in the unit.
2. Press
button to start operation, the power indicator will be on. Press it again to stop operation.
3. Press
button to select wind speed.
4. Press
or
at 5% intervals or "CO" . After the humidity setting is stopped for 10 seconds, dual-8 displays the ambient
humidity.
After a period of working,when environment humidity is lower than the selected humidity by 2%,compressor
will stop ;When environment humidity is equal to or higher than the selected humidity by 3%, compressor will
restart once 3-minute compressor protection time over.
When setting the humidity to " CO ", the compressor will run continuously.
5. Press
button perform mode switching: silence, dehumidifying, dryer.
SILENCE:
Run the dehumidifier at a low wind speed. The wind speed cannot be adjusted.
DEHUMIDIFYING:
If the indoor humidity is higher than or equal to 3%, the compressor starts to dehumidify, the compressor and
fan run, and the compressor running indicator keeps on.
Indoor humidity after moisture, humidity drop to set the humidity below 2%, the compression mechanism,
stop the dehumidification, compressor running lights ablaze, 30 minutes before the stop the compressor and
the fan motor, fan work for 3 minutes and then testing environment humidity, if is lower than the set value,
the compressor and blower are down again 30 minutes, if higher than the set value, Both the compressor and
the fan can work again, and so on. According to the above circulation operation, the indoor humidity can be
maintained in the set humidity.
DRYER
When this function is turned on, the dehumidification operation is performed.
The wind speed is locked to high speed, not adjustable.
7.Press
button can be timer setting.
Press the button,double 8 displays 00,When you press the button again,double 8 displays 01,TIME －
LED light on,continue to press the button,it will be circulate from 0-1-2 ... ...23-24, It is the programmed time to
switch the machine.
62
button to set the desired humidity level in the room, which can be set from 30% to 90%
