Qilive Q.5372 Manual De Instrucciones página 11

• To replace the dust container, align the arrow symbol on the dust container with the unlocked
symbol on the main body and push the dust container onto the main body. Then turn the dust
container anticlockwise until the arrow symbol points to the locked symbol on the main body.
6.4. CLEANING THE FILTERS
The filters are located in the dust container and clean the air before it enters the motor. To achieve
the best vacuuming results and protect the motor, remove and clean the filters after finishing each
cleaning job. Replace the HEPA filter every 6 to 12 months depending on your usage or if it's
damaged.
1. Empty and remove the dust container.
2. Lift the HEPA filter out of the dust container and clean it with a soft
brush and tap the bottom of it on a hard surface a few times.
3. Take out the stainless steel filter and clean it with a damp cloth or
under running water if necessary. Let it dry completely.
4. Reinsert the stainless steel filter into the dust container, reinsert the
HEPA filter into the dust container, and replace the dust container.
11
EN