Idiomas disponibles
Idiomas disponibles
1. Connect the B1 Cable to the bottom of the Switch via the headset socket.***
2. Connect the other end of the B1 cable to the chair via the green input port.
1. Connect the B1 cable to the bottom of the xbox controller via the headset socket.**
2. Connect the other end of the B1 cable to the chair via the green input port.
3. The Xbox will automatically recognize the connection and pass through to the product.
4. To increase volume, press the guide button, navigate to the speaker icon and increase the
headset volume setting.
* For headset and chat compatibility, you will need to place a CTIA compliant headset into the headphone socket of the X Rocker control panel. Please check with your device manufacturer to ensure that you have a
CTIA compliant headset. If you use an OMTP compliant headset, then you may experience issues with chat and audio functionality.
** You may need an Xbox OneTM headset adapter if a headset socket is not available on your controller. These are available separately through any gaming retailer.
*** Voice-Chat compatibility for SwitchTM may rely on a third-party mobile phone app rather than direct console connection fro certain games, please check the game developer's information if you encounter any
compatibility issues.
TROUBLESHOOTING TIPS
NO POWER GOING TO THE CONTROL PANEL
•
Make sure the power cable is connected correctly.
•
Make sure that the power source is working correctly.
•
•
Connect a mobile phone to the X Rocker using the phone connection guidelines in the manual to test the chair for sound.
•
•
•
Please make sure the volume of the source device is at a higher level to strengthen the audio signal.
•
Please contact X Rocker Support regarding this issue.
•
You may need to purchase a TOSlink adapter. If you are unsure as to which to purchase, please contact X rocker support regarding this issue.
WWW.XROCKERGAMING.COM
1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket.
2. Connect the other end of the B1 cable to the chair via the green input port.
3.
the PS button on the PS4 controller until the quick menu appears on screen.
4. In this menu select [adjust sound and devices].
5. Then select [output to headphones]..
6. Change the setting from [chat only] to [all audio].
7. Make sure the volume in the previous menu is set to the maximum.
1. Connect the B1 cable to the bottom of the PS5 Dual Sense controller via the headset socket.
2. Connect the other end of the B1 cable to the chair via the green input port.
3. Press the Playstation button once to bring up the control center.
4.
5. Ensure that [Output to headphones] is correctly set to [All Audio].
6. You can check this by going to [Settings] > [Sound] > [Audio Output] > [Output to headphones]
> [All Audio].
WWW.XROCKERUK.COM
