VEVOR YKF-618 Manual Del Usuario página 13

Problems
The machine
fails to run
Tripping off
frequently
Abnormal
noise and
vibration
VII.Troubleshooting
Causes
1.The power supply has
improper voltage.
2.Whether the unit has been
connected to the power supply
or whether the fuse has burned.
3.Whether re-start the machine
within 3 minutes.
1.The power supply has
improper voltage.
2.Whether the air inlet/outlet has
been blocked.
Whether the temperature of inlet
air becomes too high due to
some causes.
1.The machine has not been
flatly placed.
2.Stirrer blade has been
damaged.
3.Reducer is short of oil or its
oils dirty.
4.Some parts get loosened
5.Belt is too loosen or too tight
- 11 -
Solutions
1.Re-adjust the
power supply
2.Re-connect the
wire or replace the
fuse.
3.Wait for at least 3
minutes before
re-starting.
1.Re-adjust the
power supply
2.A clearance of 50
am for air inlet and
outlet shall be kept.
3.Eliminate the
causes.
1.Place the machine
flatly
2.Replace the blade
3.Add oil or replace
the oil
4.Tighten them
5. Re-adjust the bell.