Idiomas disponibles
Idiomas disponibles
11.
Working environment
•
Keep temperature of environment at 10°C ~ 45°C when charging battery, 0°C ~ +45°C when battery is working.
•
Keep tool at temperature of 0°C ~ +60°C when working
•
Do not use in explosive atmosphere or near flammable substances or gases.
•
Do not use in case of rain or on wet branches
12.
Operations start procedure
Please wear suitable cloth and glove when operate this tool. Always check tools before use, make sure on/off switch and safe switch are all ok. The
power should be put off when you loosen the trigger. Stop using the tool in case of switch failure. Always check rated voltage of battery match pruning
shear.
Switch off the machine, blade will stop in many second, must sure blade stop fully before touching it, otherwise blade will hurt your body.
•
Switching on: Press the power button. After the LED lights up, press the trigger twice in rapid sequence to open the blades.
•
Do not exceed the cutting dimensions to protect the scissors and battery from possible damage. Do not cut larger branches than those indicated in the technical
specifications.
•
Release the trigger if the blade is blocked, the blade will automatically return to the maximum open position.
•
Switching off: Keep the trigger pressed for three seconds, then press the power button for three seconds until it shuts down completely.
•
LED light: keep the trigger pressed for five seconds, the LED will turn off; keep the trigger pressed for another five seconds, the LED will turn on.
Caution: Do not sway the pruner from the left to right in order not to damage the edge of blade during the resume process of blade.
Check the working frequency of the blade in order to verify the good working condition.
13.
Cutting
Wear suitable work clothes such as boots with non-slip soles, sturdy long trousers, gloves and goggles.
Pag. 24 di 164
