Worx WX876 Manual página 13

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
mode.
INPUT
DC 12V
CUT
CUT IN
OUT
H
8.5V
10.9V
M
10.1V
11.4V
L
11.1V
12.4V
Note:
1. It is suggested to select H when connected to
car power, while, M or L should be set when it is
connected to a portable battery or other back-up
battery.
RECOMMENDED TEMPERATURE
FOR COMMON FOOD
Common Food
Recommended Temperature
Fruits
5~8° C/41 ~46° F
Vegetable
3~ l0°C/37~50° F
Meat
-l8°C/0° F
Drinks
5
C/41
o
Delicatessen
4
C/39
o
Wine
l0° C/50° F
Ice cream
-10°C/14° F
6. CLEANING
It is well-suggested to use the wet cloth to wash the
cooler.
WARNING:
1. Turn the cooler off and unplug the product
before clean the cooler.
2. Do not sink the cooler in water and wash the
cooler directly.
3. Do not use any abrasive cleaning agents to clean
the cooler as these agents may cause damages to
the product.
7. STORAGE
Short-time storage
turn the cooler off and unplug the product, the
Just
use a dry cloth to clean the storage room. Finally,
put the cooler in storage.
Long-time storage
20V Portable Electric Cooler
DC 24V
CUT
CUT IN
OUT
21.3V
22.7V
22.3V
23.7V
24.3V
25.7V
F
o
F
o
1. Switch off and unplug the device;
2. Empty the storage room and use a dry cloth to
wipe the excess water from the cooler;
3. Put the cooler in a dry place and keep the lid
sightly open to avoid odors.
4. Recommended storage environment:ambient
temperature: 25°C, ambient humidity:75%.
8. MAINTENANCE
Frost will reduce the cooling capacity. It is well-
suggested to defrost in time to avoid this:
1. Switch off and unplug the device;
2. Empty the storage room;
3. Leave the lid open;
4. Wipe off the defrosted water with a soft cloth.
WARNING: Never use the hard or sharp tools to
break the ice or remove any objects which have
frozen in place.
FOR BATTERY TOOLS
The ambient temperature range for tool and battery
use and storage is 0
C-45
o
The recommended ambient temperature range for
the charging system during charging is 0
C.
o
C-40
C.
o
o
EN
13
loading

Este manual también es adecuado para:

Wx876.x