Idiomas disponibles
Idiomas disponibles
7
Button
Confirm a selection (or action) from a MENU list.
OBDII（EOBD)
8
Diagnostic
Connect the tool to the vehicle's Data Link Connector (DLC).
Cable
9
LCD Screen
Display test results.
10
Charging LED
Show the charging status.
Press it and last 3 seconds to turn it on.
• Screen On: Press it once to enter hibernate mode.
• If the tool has no power, or after the automatic shutdown interval, the tool will
shut down automatically.
11
Button
• If the device is charging and does not operate within 5 minutes, it will
automatically enter hibernate mode to conserve battery power.
• Screen Off (hibernate): Press it once to wake it up.
Press it and last 3 seconds to turn it off.
2
OBDII (EOBD) Diagnostic Cable
1. Connect the vehicle's DLC port to do the OBD diagnosis function and TPMS learning function.
Note: It is to connect DLC port when doing the activation or programming function. Attempting to charge the tool via OBD
diagnostic port will consume vehicle's battery power. It is not recommended to charge the tool in this way except for OBD
diagnosis operations.
2. Charging (Not recommended)
If the tool is properly connected to the vehicle's DLC(Data Link Connector) port, it will be charged
automatically.
3
Check Sensor
This function allows users to activate TPMS sensor to view sensor data such as sensor ID, tire
pressure, tire frequency, tire temperature and battery condition.
1. For initial use, please follow the steps below to enter the TPMS function menu.
Enter TPMS
Select vehicle manufacturer
Note: The indirect tire pressure monitoring system only supports the learning function.
2. Select Activate Sensor and press
to check the sensor. And repeat this step to check other
vehicle sensors.
2.1 For universal sensors, place the tool alongside the valve stem, point toward the sensor location,
and press the button.
2
Select vehicle model
Select vehicle year.
Notes:
1. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem.
2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem
while pressing the button.
2.2 After all sensors are successfully activated, the following interface will appear:
MERCEDES B Class 2014~2018
ID: 3959089
ID: 3959085
P: 248kPa
P: 241kPa
T: 39°C
T: 35°C
Vol: OK
Vol: OK
ID: 3959048
ID: 3959046
P: 248kPa
P: 244kPa
T: 39°C
T: 35°C
Vol: OK
Vol: OK
= Exit
= Trigger
Notes:
1. Once the sensor is successfully activated and decoded, the tool will sound a beep and the screen will display the sensor data
with a tick.
2. If the sensor fails to be triggered, the icon will appear next to the wheel position.
3. If the sensor data is abnormal, it will be displayed in red.
4
Program Sensor
This function allows users to program the sensor data to the THINKCAR sensor and replace faulty
sensor with low battery life or one that is not functioning.
The following options are available for programming THINKCAR sensor: CREATE SENSOR;
MANUAL INPUT; COPY ID BY ACTIVATE; CREATE MULTI-SENSOR (1-8).
Select PROGRAM SENSOR and press the
PROGRAM SENSOR
CREATE SENSOR
MANUAL INPUT
COPY ID BY ACTIVATE
CREATE MULTI-SENSOR (1-8)
1/4
CREATE SENSOR: This function is designed to program the THINKCAR sensor by applying
random IDs created according to the test vehicle when it is unable to obtain the original sensor ID.
Select the wheel which needs to be programmed on the tool, place a THINKCAR sensor close to the
TPMS antenna of the tool, and select "CREATE SENSOR" to create a new random sensor ID.
Notes:
1.If a random ID is entered, please perform the TPMS Relearn function after programming is finished. If the original ID is
entered, there is no need to perform Relearn function.
MANUAL INPUT: This function allows users to manually enter sensor ID. Users can enter the
random ID or the original sensor ID, if it is available.
Notes:
1. If a random ID is entered, please perform the TPMS Relearn function after programming is finished. If the original ID is
entered, there is no need to perform Relearn function.
2. If a vehicle does not support relearn function, please select the Manual Input option to enter the original sensor ID manually,
or trigger the original sensor at the activation interface to get its information, before programming the THINKCAR sensor.
COPY ID BY ACTIVATE: This function allows users to write in the retrieved original sensor data to
the THINKCAR sensor. It is used after the original sensor is triggered.
Note:
*ID: indicates the sensor ID.
*P: indicates the tire pressure.
*T: indicates the tire temperature.
*Vol: indicates the battery power level.
button to enter the following interface.
3
