Tabla de contenido
Idiomas disponibles
Idiomas disponibles
m
z
C)
r
o
ms
18
The image is too dark.
[ Check |
Action |
SELF-TEST function
Press the MENU key to check the SELF-TEST
screen.
Is either one of the numeric values for fH or fV
displayed in red?
The image scrolls
Signal cable
continuously.
The input signa! frequency exceeds the range of
the security range of this unit.
Read the operation manual of the computer and
change the display mode.
The display color is
Signal cable
Connect the signal cable correctly.
abnormal.
The screen size and
Is the input synchronization signal! Check the video output mode from the computer,
and select a mode within the LCD monitor
operating range. (For details, please read the
operation manual of the hardware you are using.)
The front panel keys fail to | Are 2 or more buttons being
Operate only one key at a time.
operate.
operated at the same time?
The screen does not
Is the rotating direction correct? | The screen rotates 90 degrees clockwise when
rotate.
landscape orientation and counterclockwise
when portrait orientation.
Is the lock released?
To release the lock, pull the bottom of the screen
forward up.
The screen rotates but the | Is the Pivot? Software loaded?
| Install the accessory Pivot? Software. For detail,
image does not change.
read the operating manual of the Pivot? Software.
Security Port
A security cable can be installed to prevent theft of the LCD monitor base.
A wire cable manufactured by Kensington can be connected to the security port on the rear panel of the main unit.
G A
TT
TTT
TETE
Et
—
position do not change.
within the operating range?
For details, please refer to the Kensington instruction manual.
« Inquiries»
Kensington
2855 Campus Drive
San Mateo, CA USA 94403
800-535-4242, x3348
Intr: 415-572-2700, x3348
Fax: 415-572-9675
Technical Support (USA Only)
If you have read the Operating Instructions and tried the
To locate the Nearest Sales Dealer call:
troubleshooting procedures and are still having difficulty,
1-800-742-8086 (24 Hours a day)
please contact the dealer from whom the unit was purchased.
To get the latest Windows® 95 / 98
You may also call the end user Technical Support telephone
Panasonic Monitor INF files, please see our
number which is operational 9:00 am to 7:00 pm EST.
world wide web pages at:
http:/Avww.panasonic.corvalive
To contact the Technical Support Group call:
1-800-726-2797 (9:00 am to 7:00 pm EST)
To get information on enclosed software
To locate the Nearest Authorized Panasonic Service Center call:
(portrait
landscape), please see PDI Web
1-800-726-2797 (24 Hours a day)
site at http://www. portrait.com
To obtain Operating Instructions and Service Manuals call:
And contact by E-mail at
Phone
: 1-800-833-9626
growe
8 portrait.com
Fax
: 1-800-237-9080
(6:00 AM to 4:30 PM Pacific Time)
Tabla de contenido
