Idiomas disponibles
Idiomas disponibles
3.1)
ON/OFF Push button (12)
Located on the motor where it can be clearly seen by the operator and
can be rapidly activated if necesary .
Press the button to switch on the drill: the display will light up,
showing the main screen.
Press again to switch off the drill: the display will turn off.
AUTO-POWER OFF: In order to optimise the charge of the
battery, the machine is equipped with a timer which discon-
nects power to the motor when the machine has not been
operated for a time period of 5 minutes, to reactivate the
5 minutes
machine press the ON/OFF push button again.
3.2) Control Handgrip
18
3.3) OLED Display
The display (12) switches on automatically when the drilling ma-
chine is activated and automatically off in case of non-operation.
The screen is divided into two parts, separated by a vertical
dividing line, intended to viewing the following information:
left side, machine information data.
right side, spindle rotation direction / any errors or operating
anomalies (ref. to § 7).
13
3. CONTROLS / INDICATORS
3. CONTROLS / INDICATORS
It Is used to operate the sleeper drilling machine, the motor start
button (18) and the mechanical interlock (19) (to prevents the
accidental starting of the machine) are located on the control
handgrip.
The start button (18) can be pressed simultaneously
with the mechanical interlock (19).
19
7
12
MENU'
SD-36B
A
S/N 24AX02
FW S1K848..
100
12
SD-36B
B
13
10 h 25 m
