Chal-tec Boe Manual Del Usuario página 43

When adjusting the tilt
position of the backrest,
make sure that the metal
bracket is not jammed into
the gap of the seat surface,
otherwise the seat belt
cannot be adjusted.
4. Pass the car belt through the hole on the side of the backrest and through
the hole on the side of the other side and insert it into the buckle of the car
seat.
5. Pull the seat belt in the direction of the arrow and attach the belt clamp to
the diagonal of the seat belt. Make sure that the belt clamp is as close as
possible to the buckle of the seat belt without touching it. When you have
made sure that the child seat is firmly installed, it can be used.
IMPORTANT
Bottom
Metal bracket
EN
43