fatboy FLAMTASTIQUE XS Manual página 7

2: Storage/Moving safety, the plug
should be mounted in place when
storing or moving Flamtastique XS to
avoid accidental spilling or leakage in
case of tilting or falling over.
- Before (Re)igniting take the glass
chimney off. NOTE: MAKE SURE THE
GLASS CHIMNEY HAS COOLED DOWN
BEFORE REMOVING IT.
- Use the round handle to adjust the
visible wick length to 2mm for ignition.
- Use a long lighter or match to ignite
the fire.
- To extinguish the Flamtastique XS turn
the wick down so it moves into the
center part. Or gently blow
out the flame.
- Lack of oxygen will cause the flame
to extinguish.
Maintenance:
- Please make sure to store Flamtastique
XS indoors.
- The wick will slowly burn down and
will need to be replaced after a while.
Please make sure to use a 7mm round
cotton wick (approx. 20cm long) to
ensure the best user experience.
Refilling:
- Before refilling the fuel container
please make sure the Flamtastique XS
is turned off and that all the parts have
cooled down.
- Remove the burner (with the round
handle) by turning it counterclockwise
from the fuel container.
- The wick might leak some oil so make
sure not to spill any on vulnerable
surfaces!
- Refill the fuel container to the maxi-
mum level shown on the fuel container.
- Re-assemble the burner by turning
it clockwise on to the fuel container.
Hand-tight is just fine.
Cleaning:
- Flamtastique XS can easily be cleaned
using a moist cloth with lukewarm
water. Take off the chimney before
cleaning. Please ensure the fuel
chamber is empty (or nearly empty) to
avoid spilling!
- Before cleaning the chimney make
sure it has cooled down and carefully
remove it from the center part. The
chimney can be cleaned using water
and soap. NOTE: MAKE SURE THE PART
HAS COOLED DOWN.
Trouble shooting:
My Flamtastique XS is not working:
- Make sure the fuel container is
properly filled (there is an indicator on
the container showing the maximum
filling level).
- Make sure there is enough remaining
wick (inside the glass chamber) to be
submerged into the fuel.
- Make sure the wick is set to length
before use, The round handle can be
rotated to adjust the wick length.
In order to do so please make sure
the screw in the center of the wick is
released for the wick to move freely.
- If the wick burned to a minimum
please install a new one. (7mm round
cotton wick)
- After not having being used for a while
the wick might dry out. It might help to
7 - EN