Idiomas disponibles
Idiomas disponibles
Your wireless thermometer will alert you once the meat reaches the perfect core
temperature or once the timer has run down. The transmitter and receiver are
synchronised every 5–6 seconds within 30 m.
See enclosed quick start guide for more tips and starter aids.
OPERATING THE BARBECUE THERMOMETER
SETTING THE TEMPERATURE
1.
You can monitor the temperature of up to 3 measurements at the same time
and adjust the desired grilling temperature individually. Alternatively, you can
also choose from 7 pre-set meat types and 4 doneness levels.
2.
Please make sure to place the food probes in the middle and on the thickest
part of the food being prepared. You should not place them on a bone or fatty
tissue as this can falsify the measurement.
3.
PLEASE NOTE: The food probes get very hot during use. Make sure to wear
heat-resistant gloves to avoid burns. Keep hot items away from children. The
probes are heat resistant for temperatures up to 300 °C.
4.
The temperature is displayed in °C by default but can be changed to °F. Also
refer to the function overview of the transmitter in the parts description.
5.
Press the PROBE/TIMER button to select probe 1, 2, or 3 for your settings.
6.
You can use the MEAT button to set the desired type of meat. Select FREE
mode for custom settings. You can set the desired temperature using the + and
- buttons.
7.
The TASTE button can be used to select the doneness level.
Once the set core temperature is reached, an alarm sounds and both displays flash.
You can switch off the alarm by pressing any button.
USING THE STOPWATCH
1.
You can use the stopwatch for each of the three food probes. To do this, use the
PROBE/TIMER button on the transmitter to select probe 1, 2, or 3.
2.
Press START/STOP/CLEAR to start/stop the stopwatch.
24
SETTING THE TIMER
1.
Alternatively, you can set a timer for each probe. An alarm will sound once the
set time has elapsed. You can switch off the alarm by pressing any button.
2.
You can set the time in hours/minutes or minutes/seconds and have the setting
displayed on the LCD screen.
3.
Press PROBE/TIMER on the transmitter to select probe 1, 2, or 3. Hold down the
PROBE/TIMER button to switch to the timer mode. The first two decimal places
on the display flash and you can adjust them using + and -.
4.
Hold down the + or - button to speed up the process.
5.
Press PROBE/TIMER to move to the next two decimal places and set the
desired time. Confirm your setting by pressing PROBE/TIMER.
6.
Press START/STOP/CLEAR to start/stop the timer. Your setting is then
displayed on the transmitter and receiver at the same time after the next
synchronisation.
Once the timer runs down, an alarm sounds and both displays flash. You can switch
off the alarm by pressing any button.
CLEANING AND MAINTENANCE
1.
Leave the probes to cool down completely before cleaning. They get very hot
during use. Make sure to wear heat-resistant gloves to avoid burns.
2.
Clean the probes with hot water and a mild detergent and subsequently dry.
Only use a damp cloth to clean the transmitter and receiver.
3.
Do not immerse the probes, transmitter, or receiver in water. This can damage
the devices permanently.
25
