Idiomas disponibles
Idiomas disponibles
Swing function
When the machine is under operating mode, "swing" button can be pressed to
start swing function; such function can be closed after re-pressing of this button;
After the machine stops heating function, the swing function will be stopped.
Forced shutdown function
After the machine is powered on and started, it will be shut down forcibly in case
of no valid operation after 12h continuous operation.
Short-circuit and open-circuit protection function of
temperature sensor
In case the temperature sensor has short circuit or open circuit, regardless of the
mode, the digital screen will display "E2" or "E1" and be illuminated, at this time, the
operation of any button is invalid, and the buzzer will be ringing for 10 times.
Safety protection
When it is under startup state, and when the indoor ambient temperature Th is
higher than 50℃, the system will turn off all the outputs, the digital screen will dis-
play "FF" and be flickered for 10 times at a frequency of 1 time/second; at this
time, pressing of any button will not work, and the protection can only be with-
drawn after the power is cut off.
Rollover protection
When the machine is rolled over, the screen will display P4 and be shut down au-
tomatically, and several warning tones will be sent. In case the machine is aligned
within 10 warning tones, the warning tone will be stopped.
Remote control
Turn on/off
the Swing
button
ECO button
Button of temperature / time
decrease
Control range of remote controller
The remote controller control can be normally
used within 5 meters in front of the product
and in the left and right angles of 30 degrees.
ON/OFF button
Funtion button
Button of temperature / time increase
Timer button
(AAA battery 1.5V)
Please use a manganese or alkaline battery
of type "AAA" and do not use a non-recycla-
ble battery.
5
Power assembly
drawing
