Idiomas disponibles
Idiomas disponibles
Preparing for use
1 Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2 Place the fried plate in the pot .
Do not fill the pot with oil or any other liquid.
Do not put anything on top of the appliance, the airflow will be disrupted and affects the hot
air frying result.
USING THE APPLIANCE
The oil-free can prepare a large range of ingredients.
Hot air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pot out of the Hot-air fryer.
3. Put the ingredients in the pot.
4. Slide the pot back into the Hot-air fryer.
Noting to carefully align with the guides in the body of the fryer.
Never use the pot without the Fried plate in it.
Caution: Do not touch the pot during and some time after use, as it gets very hot. Only hold
the pot by the handle.
5.Determine the required preparation time for the ingredient ( see section 'Settings' in this chapter).
6.Some ingredients require shaking halfway through the preparation time (see section "Settings" in this
chapter). To shake the ingredients, pull the pot out of the appliance by the handle and shake it. Then
slide the pot back into the air fryer
Tip: If you set the timer to half the preparation time, you hear the timer buzzer when you have to
shake the ingredients. However, this means that you have to set the timer again to the remaining
preparation time after shaking.
7. When you hear the timer buzzer, the set preparation time has elapsed. Pull the pot out of the
appliance
Tip: You can adjust temperature or time according to your taste during use. Your settings will be
kept for about 10 mins after you pull the pot out of the body.
8. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pot back into the appliance and set the timer to a
few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer and place it on trial framework.
Do not turn the fried plate upside down with the pot is still attached to it, as any excess oil that
has collected on the bottom of the pot will leak onto the ingredients.
As the pot and the ingredients are hot. Depending on the type of the ingredients in the air fryer,
steam may escape from the pot.
10. Empty the frying pot into a bowl or onto a plate.
11. When a batch of ingredients is ready, the Hot-air fryer is instantly ready for preparing another
batch.
