Idiomas disponibles
Idiomas disponibles
e. Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kickback.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near
the line of cut and near the edge of the workpiece on
both sides of the wheel.
f. Use extra caution when making a "pocket cut" into
existing walls or other blind areas. The protruding
wheel may cut gas or water pipes, electrical wiring or
objects that can cause kickback.
GB
3. SYMBOLS
Danger notices and information are clearly marked
throughout these instructions for use. The following
symbols are used:
Hazard symbols with information on
prevention of personal injury and property
damage.
Precaution symbol with information on
prevention of harm / damage.
Notice symbol with information on how to
handle the device properly.
Double insulated for additional protection.
Do not expose to rain or water
Do not burn
Read these operating instructions well
before you use the tool.
Protect the tool from the damp and never
expose it to rain
Risk of injury when instructions are not followed
Risk of electric shock
These symbols identify the required personal protection
equipment:
Wear safety goggles
Wear ear defenders
Wear safety shoes
Wear protective gloves
Wear close-fitting work clothes
Always operate with two hand
Not for cut-off operation
11
