Choice of several hobs
If you use this function for more than one heating zone, the timer display shows the
shortest time.
Example: The timer of zone 2 is set to 3 minutes and that of zone 3 to 6 minutes. The
timer display shows [03].
Set to 6 minutes
Set to 3 minutes
Note: The flashing red point next to the power display means that the timer display
shows the time of the heating zone. If you want to check the set time of another
heating zone, touch the heating zone button. The timer shows the set time.
After the time has expired, the cooking zone goes out and the display shows [H].
If you want to reset a timer that has already started, start again from step 1.
Time until automatic shutdown
The automatic shutdown is a protective function of your device. If you forget to switch it
off after cooking, the hob will switch off automatically after a time preset at the factory.
The times differ depending on the performance level, as can be seen in the table below:
Power level
Keep warm
Operating time
8
(hours)
When the pot is removed from the hob, the appliance stops heating automatically and
switches off automatically after 2 minutes.
1
2
3
4
5
8
8
8
4
4
6
7
8
9
4
2
2
2
EN
63