USING THE CD PLAYER
I Playing an audio CD
You can listen to the music through headphones or through an amplified external
speaker system (not supplied), connected to the headphone jack/line out jack.
Be sure the headphone volume control is turned down before playing an audio CD.
1.
Press the OPEN button to open the disc tray.
2.
Insert an audio CD, printed (label) side facing up. Make sure the disc clicks
into place. Close the disc tray.
3.
Plug your headphones or external amplified speaker system (not supplied)
into the headphone jack/line out jack.
4.
Press and Hold the OPEN button for 2 seconds until the busy indicator
flickers continuously.
5.
Rotate the headphone volume control to adjust the volume.
Notes :
•
To go to the next track, press the OPEN button during playback for more than 2
seconds until the indicator flickers continuously. Play starts from the next selected
track.
•
Some types of CD-ROM discs allow you listen to sound or music coming from the
CD-ROM through the headphones or amplified external speaker system (not
supplied) connected to the Headphone jack/Line Out jack of the CD-ROM drive. If
your notebook PC is equipped with a speaker system and a Line In jack, use the
audio cable (not supplied) to connect the Computer's Line In jack and the CD-ROM
drive's Line Out jack.
E-10