Priority; 100 V / 70 V / 4 Ω Line Speakers; 100 V / 70 V High Impedance - Optimus AXF-240 Manual De Instalación Y Funcionamiento

AXF-240
AMPLIFIER

5.8. PRIORITY

The equipment has different levels of priority.
Priority 1 (max.): EMG input (Contact or VOX activation)
Priority 2: MIC 1(Pri) = MIC 2(Pri) = MIC 3(Pri) = MIC 4(Pri) = MIC 5(Pri) (Contact or VOX activation)
Priority 3: AUX 1 = AUX 2 = MIC 1 = MIC 2 = MIC 3 = MIC 4 = MIC 5
5.9. 100 V / 70 V / 4 Ω LINE SPEAKERS
The amplifier has three speaker outputs differentiated as high (100 V / 70 V) and low impedance (4
Ω). Never connect multiple speaker lines simultaneously.

5.9.1. 100 V / 70 V HIGH IMPEDANCE

Connect the speakers in parallel between the COM and the corresponding 100V / 70V output. The
total power of all the speakers must not exceed the power of the amplifier.
NOTE: Each line is independent, never mix two lines. The minimum section is 1.5 mm², but it can be
increased according to the installation requirements.
AXF-240_Manual_ENG_V1.0 Page 10 of 16