Idiomas disponibles
Idiomas disponibles
Technical data
Code
Description
Net Weight
(without bar and chain)
Bar Length
Chain Pitch
Chain Gauge
Drive Sprocket Wheel
Motor Cylinder Capacity
Motor Rated Power
(ISO 7293)
Maximum Motor Speed
Chain Speed
Motor Idle Speed
Fuel Tank
Chain Oil Tank
Work Cycle
Fuel Specifications
• The chain saw is built with an air-cooled, 2-stroke motor using unleaded gasoline, high quality self-mixing oil with fuel
stabilizer specified for air-cooled 2-stroke motor.
• The motor is certified to function with unleaded gasoline for vehicles with an 87 ([R+M]) octane-rating or higher.
• Do not use any type of pre-mixed gasoline with oil purchased in gas stations, like the one fit for motorcycles.
• DO NOT use automotive oil, nor outboard 2-stroke motor oil.
• The mix ratio shall be 50 parts gasoline per 1 part oil (ratio 50:1). Prepare the mix in a gasoline approved container. Always
mix thoroughly before pouring in the motor tank.
CAUTION
Do not use fuel mix that has been stored more than 15 days. Mix only small amounts.
Never smoke near fuel or the area where gasoline is being filled up nor where the mix with
WARNING
oil is being prepared or when operating the chain saw.
Unleaded
Gasoline
1
L
1 liter
To extend the useful life of the motor use TRUPER
MOT-3814
102735
14"
30 minutes' rest per each tank consumed.
2-stroke
Motor Oil
+
4 capfuls of oil
®
MOT-3816
16296
Chain saw
9.9 lb
16"
3/8"
0.05"
6 sprockets
38 cc
2.3 Hp
12 500 RPM
78 ft/s
From 2 600 RPM to 3 400 RPM
9.4 oz
6 oz
Maximum 6 hours daily.
=
EXPERT synthetic oil for 2-stroke motors.
MOT-3818
16297
18"
Mix
50:1
Mix
ENGLISH
3
