Brigmton BAI-220 Manual De Usuario página 9

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WIRED HEADPHONE
Insert one end of the audio cable into the audio socket of the receiver (fig. 4)
and insert the other end into the headphone socket of the electrical devices,
such a Mp3, DVD, etc. Then the unit can be used a wire headphone.
TURNING OFF THE UNIT
When the unit is not used, move the function switch on the emitter to OFF
position to turn off the emitter and turn the volume control receiver to the OFF
position, and the power indicator receiver will go out and the receiver will turn
off. Remove batteries when not using for a long time.
FUNCTIONS
A. RECEIVER
1. Battery compartiment cover
2. Volume control and power buttom (ON/OFF)
3. Scan key (SCAN)
4. Reste key (RESET)
5. Power indicator
6. Audio socket
B. EMISOR
7. Power indicator (front)
8. Power and function switch
9. Microphone socket (MIC)
10. Power socket
11. Microphone (MIC)
12. Audio cable of emitter
13. battery compartiment cover (bottom)
NOTES
To achieve best reception spread out emitter audio cable of the emitter (the
emitter audio cable can also be used as antenna)
If the sound is distorted or too strong, adjust the volume of the signal source
(TV, DVD, etc.) to a lower level and reception performance may be improve.
Put TV on mute or quite mode so you can listen to TV without disturbing any
one.
Replace the batteries if you are having the following problems
1. The emitter indicator becomes dim
2. The receiver reception is poor
3. The volume becomes wreak and the sound is distorted
Tabla de contenido
loading

Tabla de contenido