Brigmton BAI-220 Manual De Usuario página 8

OPERATION
WIRELESS HEADPHONE
1. Insert the emitter audio cable into the AUDIO-OUT socket of the electrical
device or earphone socket, and move the function of the emitter to the
WIRELESS HEADPHONE position, and the power indicator of emitter will go
ON.
2. Turn ON the volume control and power buttom (ON/OFF) on receiver, the
power indicator of receiver will go ON. First press RESET key, and press the
SCAN key, the sound sent from emitter should be head.
WIRELESS NET AUDIO CHAT
1. Connect the emitter audio cable to the adaptor to the adaptor cable (fig. 2),
and insert other end of the adaptor cable into the audio out socket of the PC,
then insert one end of the audio cable into the microphone socket (MIC) on the
emitter, and insert the other end into the microphone in socket of the PC.
2. Aim the microphone socket (MIC) of the emitter at you (fig. 3), and move the
power switch of the emitter to AUDIO CHAT position, and the power indicator
will go on.
3. Turn on the volume control and power (ON/OFF) of the receiver and the
power indicator will go on. First press the RESET key, and then press SCAN
key, and then the sound sent out from the emitter can be heard
WIRELESS MONITORING
Place the emitter near the people you want monitored (such as elderly people,
children, etc.) and aim the microphone (MIC) the people. Move the function
switch of the emitter to the MONITOR position and the power indicator will go
on. Turn on the volume control and power buttom (ON/OFF) of the receiver and
the power indicator of the receiver will go on. Press the RESET key and press
SCAN key, the sound sent out from emitter can be heard with the headphone.