Idiomas disponibles
Idiomas disponibles
Note:
You can subsequently add or remove sheets by opening and then closing
the binding spine as described.
Cleaning and removing blockages
Emptying the collection tray
Pull out the collection tray for perforated waste after use, empty it and push it
back in fully.
You should be able to feel it click into place.
Removing blockages
If the lever can no longer be lifted up when perforating, proceed as follows:
1. Secure the lever with the locking catch.
2. Pull out the collection tray and turn over the device.
3. Check whether there is anything blocking the perforating mechanism and
loosen any paper or film etc. that has gotten caught with a small slotted
screwdriver.
4. Turn over the device again, push in the collection tray completely and loosen
the locking catch.
Cleaning
In order to clean the perforating and binding device, wipe it with a lightly
moistened, lint-free cloth.
Disposal
The product and its packaging have been manufactured from valuable
materials that can be recycled. Recycling reduces the amount of refuse and
preserves the environment.
Dispose of the packaging at a recycling point, which sorts materials by type.
Make use of the local facilities provided for collecting paper, cardboard and light-
weight packaging.
Should you wish to dispose of this product, do so in accordance with the current
regulations. Details are available from your local authority.
6. Loosen the locking catch and slowly
guide the lever upwards.
Take care that the paper does not slip
from the tips.
The binding spine closes around the
paper.
7. Lift the binding spine with the paper
from the comb.
14
