Victron energy Skylla-IP65 12/70 1+1 Manual página 14

8. SPECIFICATION
Skylla-IP65
Input voltage (VAC)
(1)
Input voltage range (VAC)
Maximum AC input current
Frequency (Hz)
Power factor
Charge voltage 'absorption' (VDC)
(2)
Charge voltage 'float' (VDC)
Charge voltage 'storage' (VDC)
Charge current main batt. (A)
Charge current starter batt. (A)
Charge curve, lead-acid
Recommended battery capacity (Ah)
Charge curve, Li-Ion
Temperature sensor
Power supply function
Remote on-off port
CAN bus communication port
Remote alarm relay
Forced cooling
Protection
Operating temp. range
Humidity (non-condensing)
Material & Colour
Battery-connection
Mains connection
Protection category
Weight kg (lbs)
Dimensions hxwxd incl. glands in mm
in inches
Safety
Emission
Immunity
1) Output current will gradually reduce below
110 V to 50 % @ 100 V.
2) Depending upon battery type as selected
in the setup menu.
14
(2)
(2)
(3)
(4)
DPST AC rating: 240 VAC/4 A
Battery reverse polarity (fuse)
ENCLOSURE
STANDARDS
3) Maximum current up to 40 °C (100 °F) ambient.
Output current will reduce to 60 % at 50 °C, and to 40 % at 60 °C.
4) Depending upon state of charge of starter battery.
12/70
120 – 240
90 – 265
12
45-65
0,98
See table
See table
See table
70
3
7 stage adaptive
350-700
2 stage, with on-off control or VE.Can bus control
Yes
Yes
Yes (can be connected to a Li-Ion BMS)
Two RJ45 connectors, NMEA2000 protocol
DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Yes
Output short circuit
-20 to 60 °C (full output current up to 40 °C)
max 95 %
steel; blue, RAL 5012
M6 bolts
screw-clamp 6 mm² (AWG 10)
IP65
6 (14)
401 x 375 x 265
(16 x 15 x 10.5)
EN 60335-1, EN 60335-2-29
EN 55014-1, EN 61000-6-3, EN 61000-3-2
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
24/35
See table
See table
See table
35
4
150-350
Over temperature