Cleaning And Maintenance - Mx Onda MX-CPV2037C Manual De Instrucciones

Note: If you do not have a new cartridge, you can continue working with the
ironing center using the old cartridge, but you must take into account
that the calcareous formation will take place more quickly.
EMPTYING THE WATER AND STORING THE IRONING CENTER
When finishing the ironing work proceed as indicated below:
1. Turn off the steam station, unplug it from the mains
socket and wait for it to cool completely.
2. Remove the anti-lime filter 3 and empty the contents of
the water tank over a sump.
3. Replace the anti-lime filter 3 inside the water tank and
dry any remaining water in the main unit, the non-slip
base and the sole of the iron.
4. To transport the ironing center, use the folding handle
2, to extract or collect it, see the corresponding
section.
5. Store the ironing center in a dry and dust-free place.

CLEANING AND MAINTENANCE

The sole with ceramic non-stick coating facilitates ironing making it more
comfortable and with less effort.
When not using the iron (during breaks), rest the iron on its back heel or on
the non-slip support area.
Avoid scratching the sole of the iron; do not pass over buttons, zippers,
rivets or hard surfaces.
NEVER use abrasive products to clean the sole.
The residues of lime, starch or sizing attached to the sole can be cleaned
with a wet cotton or with a non-abrasive product when the sole is still warm.
For persistent stains there are special cleaning products.
Do not use any chemical descalers that could damage the sole with
ceramic coating.
The plastic surface of the iron housing and the main unit can be cleaned
with a damp cloth, do not use abrasive products.
After each use and when the sole is still warm, use a soft cloth to clean and
dry it. Rub gently to avoid scratching the sole.
12