Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-881-003.book Page 40 Thursday, July 2, 2015 9:38 AM
For safe and proper working, always keep the
machine and ventilation slots clean.
A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
Clean the tool holder 2 each time after using.
In all correspondence and spare parts orders,
please always include the 7-digit order number giv-
en on the nameplate of the machine.
Transport
The battery is tested according to UN document
ST/SG/AC.10/11/Rev.3 Part III, subsection 38.3. It
has effective protection against internal overpres-
sure and short circuiting as well as devices for the
prevention of violent rupture and dangerous re-
verse current flow.
The lithium-equivalent content in the battery is be-
low applicable limit values. Therefore, the battery is
not subject to national or international regulations
pertaining to dangerous mediums, neither as an in-
dividual component nor when inserted into a ma-
chine. However, the regulations governing danger-
ous goods may be relevant when transporting
several batteries. In this case, it can be necessary
to comply with special conditions (e.g., concerning
the packaging).
Disposal
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EC countries:
According to the European Directive
2012/19/EU for Waste Electrical and
Electronic Equipment and its imple-
mentation into national right, power
tools that are no longer usable must
be collected separately and disposed
of in an environmentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions
in section "Transport", page 40.
Subject to change without notice.
40 | English
1 609 92A 1DM • 2.7.15
