Idiomas disponibles
Idiomas disponibles
Usage steps:
1.
Plug the power cord into the power source.
To adjust the current or Scheduled charging, ensure the charging gun is not
connected to the car, as the settings cannot be changed once connected to
the vehicle.
2.
Adjust the current if you need. The default current is 16A.
Click the button to enter the settings interface.
⚫
Click the button, select "Set Curr", then press and hold the button
⚫
for three seconds to enter the setting selection; click the button
to choose the desired current [6A-8A-10A-13A-16A]. Press and
hold for three seconds to confirm your selection.
3.
Scheduled charging if you need.
Click the button to enter the settings interface.
⚫
Click the button, select "Schedu-T", then press and hold the button for three seconds to
⚫
enter the setting selection; click the button to choose your desired scheduled time [5min-
30min-60min-90min-120min-150min-180min-210min-240min]. Press and hold for three
seconds to confirm your selection.
4.
Plus into the car, charging.
End of Use: Unplug the charging gun, then disconnect the power, and cover the charging gun with its
cap.
EN
