How To Use Your Ir Thermometer - ennoLogic eT650D Manual Del Usuario

ennoLogic Dual Laser IR Thermometer - User Manual
adjacent to the trigger button and slide a finger nail behind
the lid at the indent to pull it open. Attach the 9V battery to
the wired clip and slide the battery into the battery
compartment. (Tuck the wire in next to the battery;
otherwise the lid may not close properly.)
The battery should be
replaced when the
low battery indicator
symbol appears on
the display.

How to Use Your IR Thermometer

Aim the IR thermometer at the surface you want to
measure. Make sure there are no obstructions between the
unit and the target surface. Steam, dust, and smoke can
affect the measurement. Do not attempt to measure
through glass. Thermal shock can cause inaccurate
readings as well, make sure to let the unit warm up to
room temperature before using it. Press the trigger button
to turn the instrument on, the temperature reading will
appear. As long as the trigger button is pressed, the
temperature will continuously update and the SCAN icon
will flash. The selected emissivity will be displayed above
the temperature reading. If the Mode is set to MIN, MAX,
dIF or AVG, the small numeric display in the bottom right
corner will also update. See MODE Functions for more
detail. When you release the trigger button, the last
4