Bering BEXP05i Manual Del Usuario página 34

Press first, then press
If needed, press
(for example: Press
press or
Code Name
P0 Mandatory
defrosting
P1 Working mode
P2 Timer on/off
P3 Water pump
P4 Current time
P5 Timer on
P6 Timer off
P7 Water
calibration
NOTE: Under defrosting mode, P0=1. After defrosting finished, it will be automatic enter Normal
mode, P0=0.
7.4.4 System reset function
Press and
7.4.5
Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
7.4.6
Symbol of cooling, the light will be on when it is in operation.
Note: When parameter P1 is on checking/adjusting,
to check/adjust the User parameter from P0 to P7
second, then press
first, then press
to adjust the parameter P7 Inlet water temp. Correction from -9 to 9.)
Scope Defaul
0-1 0
0-1 1
0-1 0
0-1 0
HH:M 00：00 0-23:0-59
M
HH:M 00：00 0-23:0-59
M
HH:M 00：00 0-23:0-59
M
temp. -9～9 0
in 10s, the system will reset and display "0000" on the controller.
or to adjust the current parameter.
to enter parameter P7 checking, and press
0: Default normal operation
1:Heating mode, 0:cooling mode,
1 Timer on/off is under function ， 0 Timer on/off is out of
function (The setting of P5 and P6 won't work)
1:Always running;
Default setting: 0
and
30
Remark
will be flashing at the same time.
second, then