Idiomas disponibles
Idiomas disponibles
BASIC OPERATIONS
Press the CD button,
then press the A OPEN/
CLOSE button to open the disc compartment.
Load
disc(s) with the label side up.
To play one or two discs,
place the discs on tray 1 and 2.
To play three discs,
press the DISC CHANGE
button to rotate
the trays after placing
two discs.
Place the third disc on tray 3.
Close the disc compartment
by pressing
the ~ OPEN/CLOSE
button.
Tray number of the
disc to be played
Total playing
time
Total number
of tracks
PLAYING DISCS
Load discs
To play all discs in the disc compartment,
press the
+>
button.
Play begins with the disc on tray 1.
Elapsed
playing
time
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The selected
disc is played once.
To play with
the remote control
Press the DISC
DIRECT
PLAY button,
then press one of the
numbered
buttons
1 to 3 within 3 seconds
to select a disc.
To stop play,
press the
button.
To pause play,
press the 11 button. To resume play, press again.
To search for a particular point during playback,
keep the
4
or -
button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback,
press
the +
or -
button
repeatedly.
To remove
discs,
press the
A
OPEN/CLOSE
button.
To start play when the power is off (Direct Play Function)
Press the CD button.
The power
is turned
on and play of the
loaded
disc(s) begins.
When the 4 OPEN/CLOSE
button is pressed,
the power is also
turned
on.
To check the remaining time
Press the CD EDIT/CHECK
button
during
play. The amount
of
time
remaining
until all tracks
finish
playing
is displayed.
To
restore the playing
time display,
repeat the above.
Selecting a track with the remote control
1
Press the DISC DIRECT
PLAY button,
then press one of the
numbered
buttons
1 to 3 within 3 seconds
to select a disc.
2
Press the numbered
buttons
and the +10 button to select a
track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
The selected
track starts to play and continues
to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced
without
interrupting
play.
1
Press the DISC CHANGE
button.
2
Remove
the discs and replace
with other discs.
3
Press
the
A
OPEN/CLOSE
button
to close
the
disc
compartment.
m
c When loading
an 8-cm (3-inch)
disc, put it onto the inner circle
of the tray.
c Do not place more than one compact
disc on one disc tray.
Do not tilt the unit with discs
loaded.
Doing
so may cause
malfunctions.
Number
of track
being played
9
ENGLISH
