Idiomas disponibles
Idiomas disponibles
7.2 CONNECTING THE POWER SUPPLY
Set up the B.Box Evo so that the cables from the Power Supply (or Car Adapter), applicators, and
application modules are not under tension and lie flat on the floor without creating tripping hazards.
Do not position the B.Box Evo in a manner that makes it difficult to disconnect the unit from the
mains. Organize a suitable place for the treatment.
Connect the mains adapter to the B.Box Evo Power Supply.
―
Connect the B.Box Evo Power Supply to the B.Box Evo.
―
7.3 CONNECTING THE APPLICATORS AND APPLICATION MODULES
The applicators and application modules are connected to the B.Box Evo at ports (1) and (2) as
follows:
Guide the connector (3) into the desired port (1) or (2); the magnetic retainers ensure a secure
―
connection and correct polarization.
7.4 SWITCHING ON THE B.BOX EVO
The main switch is located on the top-right of the B.Box Evo and is used to place the device in
the operating state. After pressing the main switch, the device performs a self-test within 15
seconds and then displays the start screen. The entire start-up process can take up to 30 seconds.
z Press <main switch>.
LED indicator lights up white.
(It lights up green as soon as the B.Box Evo Battery Stand is connected and charging.)
An audible start signal sounds.
The B.Box Evo start screen is loaded.
After approx. 30 seconds, the language settings screen appears.
2119-2208-764120_IFU Evo_USA_PEMF_764120-GC-3015_Inhalt_v08.indd 52
2119-2208-764120_IFU Evo_USA_PEMF_764120-GC-3015_Inhalt_v08.indd 52
52
19.06.2023 09:50:36
19.06.2023 09:50:36
