Handling And Operation; Filling The Water Tank - Beem Fresh-Aroma-Perfect II Manual De Instrucciones

EN

Handling and Operation

PLEASE NOTE!
• Do not pour milk or other liquids into the water tank. Only ever use water to make
coffee!
• Never overfi ll the permanent fi lter.
Time
As soon as the mains plug is plugged into a plug socket, the display lighting turns on and the
time display 12:00 fl ashes. The clock has a 24-hour time format.
1. Set the hours by pressing the H button (24).
2. Set the minutes by pressing the M button (22).
The time is saved until a new time is set or the device has been disconnected from the
power supply.

Filling the Water Tank

1. Open the water tank lid (9).
2. Pour the quantity of water required for the number of cups you want (maximum 10 cups)
into the water tank (11).
3. Close the water tank lid.
All of the water in the water tank is always used, regardless of the set number of cups or
coffee strength.
Adding Coffee Beans
1. Take off the lid of the coffee bean compartment (1).
Ensure that the water tank (11) is closed so that no coffee beans can fall into the water
tank.
2. Fill the coffee bean compartment (2) with coffee beans. Do not overfi ll it!
3. Place the lid back on the coffee bean compartment.
When you switch to another type of coffee, there will still be coffee powder from the
previous type in the grinder shaft. The grinder shaft may need to be cleaned beforehand
(see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").
03958_DE-EN-FR-ES-IT_A5_V2.indb 24 03958_DE-EN-FR-ES-IT_A5_V2.indb 24
24
06.08.2020 09:48:48 06.08.2020 09:48:48