Idiomas disponibles
Idiomas disponibles
WARNING: Be careful not to place fingers near the locking hinges when opening or
closing the platform.
WARNING: ALWAYS ensure that the hinges are correctly locked in place before
placing any weight on the platform.
WARNING: Do not use this platform if any part is missing, damaged or worn.
• Ensure the platform is suitable for the intended application
• Always wear suitable shoes that provide good grip. Ensure wet paint, dirt, oil,
water, snow or other fluids and lubricants are removed from the work area before
use
• Platforms should always be comprehensively inspected on delivery, before first
use, and before every subsequent use. Platforms intended for commercial use
must be inspected for damage every day. Do not use if damaged
• Always assess the work area prior to setting up the platform. Ensure the surface is
flat and secure, there are no obstacles or hazards present, and that the platform is
suitable for the task
Intended Use
Provides temporary support as a workbench, platform or for accessing higher
areas. Not to be used for any purpose other than described in these instructions.
Not intended for long-term usage or for commercial or trade use.
Unpacking Your Tool
• Carefully unpack and inspect your new tool. Familiarise yourself with all its
features and functions
• Ensure that all parts of the tool are present and in good condition. If any parts are
missing or damaged, have such parts replaced or repaired by a suitably qualified
technician
Before Use
WARNING: Do not attempt to assemble this platform from above. The operator
must be in a position to verify the locking hinges are correctly locked into place,
otherwise a potential collapsing hazard could occur.
WARNING: Always assess the surrounding area for potential hazards. Ensure the
platform is not susceptible to collision with pedestrians, doors or vehicles and there
are no power lines or exposed electrical equipment nearby.
Assembly instructions
Locking hinges
IMPORTANT: Only unlock one hinge at a time.
WARNING: ALWAYS VISUALLY CHECK that the locking hinge is locked correctly.
2
