CASO DESIGN Beer Master Manual Del Usuario página 11

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
PLEASE NOTE
 Defective components must always be replaced with original repla-
cement parts. Only such parts will guarantee that the safety require-
ments are ful lled.
 Use the appliance only as described in the user's guide to avoid possi-
ble injury from misuse.
 Do not use the appliance:
• if the appliance itself or parts are damaged,
• if the power cord or plug is damaged,
• if the appliance has been dropped.
 Always unwind the power cord completely before use. When doing so,
ensure the power cord is not damaged by sharp edges or hot objects.
 Do not make any modi cations to the appliance or the power cord.
Only have repairs carried out by a specialist workshop, as appliances
that have not been repaired properly endanger the user. Please also
observe the enclosed warranty conditions.
 Only use the appliance with original accessories.
 The dispenser should not be used to cool other liquids and beverages.
 Do not expose this device to rain or other environmental conditions.
 Do not remove the keg from the dispenser until it is completely empty.
 Do not remove the CO pressure cartridge until it is empty.
 To avoid unintended start-up of the dispenser, make sure that the on/
o switch is turned to "O " before you connect to it to a power source.
 Leaving the door open for a longer period of time may result in a
signi cant temperature increase in the dispenser chamber.
 Before you insert a keg, make sure that it is not damaged and that its
use-by date has not expired.
 Pre-cool the beer keg before you use it. Do not put the keg in a freezer
to do this.
 Do not shake the keg before you use it.
 Do not expose the keg to direct sunlight. The keg must be stored as
per the instructions on its label.
CASO Beer Master
11
loading

Este manual también es adecuado para:

00582