Smoothskin Pure adapt Guia Del Usuario página 31

1 3 . T R O U B L E S H O O T I N G
PROBLEM
The power bar indicators on the side of the handset do not
light up when placed against your skin.
Whilst pressed against your skin, the first power bar
indicator on the side of the handset is illuminated RED, and
SmoothSkin Pure Adapt will not work.
The power bar indicators on the side of the handset are on
or are flashing in an unfamiliar pattern including a red LED
indicator light.
SmoothSkin Pure Adapt handset, treatment window, power
supply or cable are damaged, broken, cracked or appear
defective.
SOLUTION
Make sure the power supply is plugged in. Make sure the
handset is in READY mode (press the Standby/Ready
button once). Ensure the skin sensors are pressed against
the skin. Ensure the skin tone sensor is pressed against
the skin.
The area you are trying to treat is too dark for treatment.
SmoothSkin Pure Adapt includes an intelligent skin tone
sensor that automatically detects your skin tone and
selects the optimal treatment setting. Due to the nature of
Intense Pulsed Light technology, SmoothSkin Pure Adapt
is not for everyone as it cannot be used on skin tone Type
6 - very dark skin. (See Section 6).
SmoothSkin Pure Adapt will display any error messages
through combinations of lights the on the power bars
on the sides of the handset. This indicates that there is a
fault with the device. Stop using the device and refer to
the website.
DO NOT USE. If you are in any doubt about the safety
of SmoothSkin Pure Adapt or suspect it is damaged in
any way, it must not be used, and you should refer to the
website.
31