LC-POWER LC-M34-Q-C-PRO Manual Del Usuario página 11

6. Cable connection
Note: If the power cable or signal cable is damaged, you must replace it immediately.
Use a DisplayPort (preferred) or HDMI cable
to connect your monitor to the graphics
card output of your computer.
Connect the power adapter to the power
connector of your monitor.
You may connect headphones or speakers
to your monitor.
AUDIO OUT
Connect audio
playback devices
such as headphones
to the AUDIO OUT
interface.
7. Display operation
7.1 Indicator light
DCIN
Please connect the power
adapter plug to the
corresponding power port
of the monitor, and
connect the other end to a
properly grounded power
outlet.
Steady blue light indicates that the power is on and
themonitor works normally.
Rod blinking liaht indicatos that tho monitor is in itt
energy saving mode until it receives a new signal from
the computer.
If the monitor is fully turned off, the indicator light will
also be turned off.
Please make sure your computer is turned on and
Indicator light
operates normally, check if all video cables are fully
plugged in and/or connected to the monitor.