Automatic Mode; Color Mode - Mark MKL BAT 726 Manual Del Usuario

AUTOMATIC MODE

Automatic Mode will enable you to run the automatic programs on the products. To turn on Automatic
mode:
Press <Auto> on the IRC Remote
Press <+> or <-> to increase or decrease the speed of the program
FADE MODE
Fade Mode will enable you to run the automatic programs under Fade Mode. To turn on Fade mode:
Press <Fade> on the IRC Remote
Press <+> or <-> to increase or decrease the Fade speed of the program
MANUAL COLOR MIXING MODE
To manually control the RGBAW+UV Color Mixing:
Press <R >, <G>, <B>, <A>, <W>, or <UV> to make color mixing.
Note: To use the amber, white, or UV color options, the fixture must be capable of outstanding that
corresponding color light.
Press <+> or <-> to increase or decrease the value of each color

COLOR MODE

Color Mode will enable you to choose 10 colors built-in.
Press any number between <0 > and <9> to choose your color
<0> is for red, <2> is for green, <3> is for blue, <4> is for amber, <5> is for white, <6> is for
ultraviolet, <7> is for yellow, <8> is for purple, <9> is for grass green
STROBE MODE
Strobe Mode will enable you to adjust the strobe rate of the color you choose. To turn on Strobe mode:
Press <Strobe> on the IRC Remote
Press <+> or <-> to increase or decrease the Strobe Rate
Choose a color by Manual Color Mixing Mode
6