Channel Mode Setting - Mark SUPERBAT LED WI 712 Manual De Uso

6.2 STATIC SETTING
1) Press the【ENTER】button in 【STAT】menu, then enter to the static setting.
2) Press the【UP/DOWN】 button to select 【RED】，【GREEN 】，【BLUE】and 【PRST 】.
3) Press the【UP/DOWN】button to set up the 【0-255】numerical value.
4) Press the【ENTER】button to escape and save.
6.3 COLOR CAST CALIBRATION SETTING
1) Press the 【ENTER】button in 【CAL】menu, then enter to the color cast calibration setting.
2) Press the 【UP/DOWN】button to select 【RED】，【GREEN 】，【BLUE】
3) Press the 【UP/DOWN】button to set up the 【0-255】numerical value.
4) On the 【USE】interface, pressing 【YES】button means valid, 【NO】means invalid.
5) Press the 【ENTER】button to escape and save.

6.4 CHANNEL MODE SETTING

1) Press the 【ENTER】button in 【CHMD】men u, then enter to the channel mode setting.
2) Press the 【UP/DOWN】button to select 【9CH】，【6CH】，【4CH】，【3CH】，【3CH.】
3) Press the 【ENTER】button to escape and save.
6.5 DIMMING MODE SETTING
1) Press the 【ENTER】button in 【DIM 】menu, then enter to the dimming mode sett
2) Press the 【UP/DOWN】button to select 【LIN 】，【SQR 】，【ISQR】，【SCUR 】，【LIN.】，【SQR.
】，【ISQR. 】 and 【SCUR. 】 .
3) Press the 【ENTER】button to escape and save.
Illustrations ：When setting【LIN.】，【SQR. 】 ，【ISQR. 】 and 【SCUR. 】 in 【DIM 】 menu, there will be
added a little delay dimming effect for smooth..
Dimming curve:
Linear curve: square law curve: Inverse Square law curve: S-curve:
SUPERBAT LED WI 712
ing.
- 10 -
User Manual/Manual de Uso
EN