Idiomas disponibles
Idiomas disponibles
6. Establish Bluetooth connection (pairing)
1.
When the device is switched off, press the multifunction button for approx.
5-8 seconds to enter pairing mode. The "Status LED" flashes blue & red
alternately.
2.
Activate the Bluetooth search on your mobile phone and open the Blue-
tooth environment. Search and connect to "CSL-306636". The status LED
changes to blue and flashes after a successful connection. If a password is
required, try "0000", "8888", "1111" or "1234".
3.
You can now use the "Multifunction button" / "Volume +" and "Volume
-" buttons on the headset, for example, and use them as described under
point 5 "Button functions".
7. Connect with two devices at the same time (multipoint)
1.
Connect the first device as described in chapter "6. Establishing a Bluetooth
connection" and then switch off the phone's Bluetooth function.
2.
Activate the Bluetooth search on your mobile phone and open the Blue-
tooth environment. Search for and connect to "CSL-306636". The status
LED changes to blue and flashes after a successful connection.
3.
Then activate the Bluetooth function of the first phone and click on "CSL-
306636" in the list of paired Bluetooth devices to re-establish the connec-
tion. The headset is now alternatively connected to two phones.
Note: Music can be played from only one device. If you want to play music from
the other device, you must pause or close the music from the previous device. The
sample principle also applied to calls.
English
13
