Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
1c. This indicates that the cartridge is damaged.
Turn off the water supply, remove the handle
and replace the cartridge (1).
2. The light on the sensor is flashing continuously.
2. If the handle is closed, turn the handle to the
on position and move your hand in the sensor
area. If the sensor flashes 10 times continuously
and slowly, then replace the 4 "AA" batteries.
3. The sensor is not activating the water flow.
3a. When you turn the handle to the full on position,
the water will turn on.
1c
2
Replace the batteries
3a
11
1
Flash 10 times
continuously
and slowly
Pull
out
I
Squeeze
