Idiomas disponibles
Idiomas disponibles
3. Select "Stage selection" icon (29) to add a new stage for
GB
this recipe.
4. Enter the cooking parameters for different stages. Maxi-
mum numbers of cooking stages are 15.
5. Wait for the chamber's temperature until its steady.
6. If this recipe is only using for on time. Select "start" icon to
start the cooking process. The timer is counting down and
"start" icon changes to "Pause" icon.
7. Select "stop" icon to stop the cooking process.
8. You can save the customized recipe by selecting "Save"
icon (37).
9. Follow the same steps 8-10 mentioned in section "Recipe
setting interface"
10. Select " " to confirm.
Setting interface (Fig.8 on page 7)
• "Recipe setting": Preset and save the recipe in advance. See
the details in corresponding section below.
• "System": Set all the parameters of the appliance system.
For example, date and time. See the details in corresponding
section below.
• "Service", "Appliance" and "Factory": For maintenance and
repair use only.
Recipe setting interface (Fig.9 on page 7-8)
1. Import or export the recipe information from/to USB by se-
lecting the "Read or write recipe through USB" icon (39).
Please insert the USB following the steps below.
i. There have two options – READ and WRITE, after select-
ing this function.
ii. USB connector is located behind the metal cover on the
bottom.
iii. The metal cover is mounted by magnet only. (Fig.13 on
page 9)
iv. Open the dust cap of USB connector by turning an-
ti-clockwise. (Fig.1 on page 3)
v. Close the dust cap of USB connector by turning clock-
wise.
2. Delete the preset recipe by following steps.
i. Selecting "delete" icon (40)
ii. Select the recipe icon. Multiple selection is available.
iii. Select " " to confirm. A warning – "Are You Sure You
Want To Delete The Selected Recipes?", will be popped.
Select " " to confirm again. Recipe cannot be restored
once deleted.
NOTE: If no recipe is selected, a warning – "No Recipe Is
Selected To Delete!", will be popped. Select " " to return.
Select " " again to return to setting interface.
3. Setup a new recipe by selecting the "Setup a new recipe"
icon (38).
4. Enter the time and temperature, select the microwave
power and fan speed level.
5. Select "Stage selection" icon (29) to add a new stage for
this recipe.
6. Enter the cooking parameters for different stages. Maxi-
mum numbers of cooking stages are 15. (Fig.9b on page 8)
7. Select "Save" icon (37) to save the receipe.
8. Enter the name, select the image and the category. (Fig.
9c on page 8)
9. If you have more than 2 cooking stages, you can set alarm
for each stage, except the last stage. This message will be
18
popped before each stage as a reminder of action.
10. Select "Alarm" to set the parameters.
Stage Index: Corresponding cooking stages
Alarm Enable: Yes/no
Cancel: "Manual" means that the alarm needs to be
switched off by opening the door. "Auto" means that the
alarm will switch off after 30s automatically.
Name: The name will be a message which is popped after
the stage. This is a reminder for taking action before next
stage. For example, adding foods or flipping steak.
Alarm Tone: There have 5 types of tones.
11. Select " " twice to confirm and go back to main interface.
System setting interface (Fig.10 on page 8)
• System information: For maintenance and repair use only.
• Language: System language.
• Date: System date. It shows on the main interface.
• Time: System time. It shows on the main interface.
• Auto Start: Set an auto on function. You can select a recipe
and starting time.
NOTE: This will be only activated normally when the appliance
is under standby interface. When the appliance is completely
switched off, no auto on function will be activated.
• System passcode: Set up password for entering system setting.
• Energy save mode: Set a time (5 – 30mins) to start the energy
saving mode. If no any operations for the appliance during
the setting time, the energy saving mode will activate. In this
mode, the preheat temperature will reduce to 121°C.
• After everything is finished, select "return" icon twice to go
back to the stadnby interface.
Cooking utensils guide
Below a general guide to help you select suitable utensils:
Micro-
Cooking
wave
utensil
mode
Heat -resist-
√
ant glass
Non-heat-re-
x
sistant glass
Heat resistant
√
ceramics
Micro-
wave-safe
√
plastic dishes
Kitchen paper
√
Metal tray
x
Metal rack
x
Aluminum
foil and
x
containers
√: Suitable for use under the corresponding mode. Please
follow the manufacturer's instruction and with the lid
removed. Do not use if the surface is cracked or damaged.
x: Not suitable for use under the corresponding mode.
Combi-
Grill
nation
Remark
mode
mode
√
√
x
x
√
√
Not suitable
x
x
for high temp.
Short
duration for
x
x
warming only.
Attended use.
√
x
√
x
Arcing occur
if used in
microwave.
√
x
