Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Unpacking
This product requires assembly.
• Carefully lift the saw from the carton and place on a level work surface.
WARNING
• DO NOT use this product if any parts in the Package Contents and Hardware Contents lists
are pre-assembled to your product when you unpack it (apart from those specified as being
pre-assembled).
Parts on this list are not assembled to the product by the manufacturer and require customer installation.
Use of a product that may have been improperly assembled could result in serious personal injury.
1. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
2. DO NOT discard the packing material until you have carefully inspected and operated the tool.
3. The saw is factory set for accurate cutting. After assembling it, check for accuracy.
4. If any parts are damaged or missing, please call 1-888-3 Kobalt (1-888-356-2258) for assistance.
WARNING
• If any parts are damaged or missing, DO NOT operate this tool until the parts are replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
• DO NOT attempt to modify this tool or create accessories not recommended for use with this tool.
Any such alteration or modification is misuse and could result in a hazardous condition leading to
possible serious personal injury.
• DO NOT connect to power supply until assembly is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Mounting Holes
This tile saw can be mounted to an optional stand (Item #0544098, sold separately at www.lowes.com).
This stand can be shared with the Kobalt 7 in. sliding saw (Item #1085050, sold separately).
1. The tile saw (A) can also be mounted to a firm
supporting surface such as a workbench. Four bolt
holes have been provided in the saw's base for this
purpose. Each of the four mounting holes should be
bolted securely using M6 socket bolts, lock washers,
and nuts (not included). Bolts should be of sufficient
length to accommodate the saw base, lock washers,
hex nuts and the thickness of the workbench. Tighten
all four bolts securely.
Carefully check the workbench after mounting to make
sure that no movement can occur during use. If any
tipping, sliding, or walking is noted, secure the
workbench to the floor before operating.
1
11
A
kobalttools.com
