Idiomas disponibles
Idiomas disponibles
Operations Instruction
●
The probe should be wiped clean before each measurement and the
temperature of the engine must be below 60°C.
●
Press and hold the [
●
Press [
] for mode selection: petrol engine mode or diesel engine mode.
●
Press [
●
Submerge the probe in the oil.
●
Press [
●
The interface will display the transmittance of the oil.
●
Indicates [
when the transmittance is between 50% and 30%, and [
below 30%. [
●
After the measurement is completed, press and hold the [
for shutdown the tester.
●
The instrument will automatically power off after 5 minutes of no activity.
Warranty
From the date of receipt, we provide a three-year warranty for the main unit
and all the accessories included are covered by a one-year warranty.
Warranty access
The repair or replacement of products is determined by the actual break-
●
down situation of product.
●
It is guaranteed that AUTOOL will use brand new component, accessory
or device in terms of repair or replacement.
●
If the product fails within 90 days after the customer receives it, the
buyer should provide both video and picture, and we will bear the
shipping cost and provide the accessories for the customer to replace it
free of charge. While the product is received for more than 90 days, the
customer will bear the appropriate cost and we will provide the parts to
the customer for replacement free of charge.
These conditions below shall not be in warranty range
The product is not purchased through official or authorized channels.
●
The product breakdown because the user does not follow product
●
instructions to use or maintain the product.
] key for more than 2s to power on the tester.
] to toggle the temperature.
] for oil transmittance test.
] when the transmittance is between 100% and 50%, [
] to indicate the current oil measurement temperature.
4
]
] when it is
] key for 2s
