Idiomas disponibles
Idiomas disponibles
INTERFACE DISPLAY AND DESCRIPTION
Home
interface
NORMAL
Mode
●
After the power clip is properly connected, the home interface
will appear on the screen. Press the "T" key to switch modes or
press the "S" key to select and enter this mode.
As shown in the figure below:
After entering the "NORMAL" mode, you can use the "T" key to
●
switch the brake fluid types (DOT3, DOT4, DOT5); then press
the "S" key to select the required fluid type.
As shown in the figure below:
●
In the NORMAL mode, after selecting a fluid type, it will enter
the ready interface, which displays the reference dry and wet
boiling points and battery voltage of the oil product;
The page is as shown in the figure below:
8
