Idiomas disponibles
Idiomas disponibles
GB
TAILPACKS
(OL311) / (OL312) / (OL313)
Included (where applicable):
Advice to the user:
Before fitting your Tailpack, always ensure that the surface onto which it is to be fitted is completely free
from any dirt. This is because even the finest of residue can lead to marking. It is designed to be
attached onto a removable rear seat/pillion seat of a motorcycle, not onto a seat hump/cover nor a rack.
Roll closure at least 3 times and secure with clip buckles to ensure a waterproof seal.
To fit:
1. Unlock and lift seat of motorcycle (or pillion seat pad if motorcycle has one).
2. Thread the Velcro seat straps through the holes provided in the fold-out flaps
(where applicable.)
3. Fasten bag securely to seat using Velcro strap provided. This Velcro strap
must be fitted tightly. Replace seat and lock into place.
4. If the Velcro strap is too long it can be cut down with a pair of scissors. However, ensure a minimum 15cm
overlap/contact patch is still achieved.
5. Bungees or webbing straps have been included which are suitable for many motorcycles. However, you
may need to purchase bungees to suit your specific motorcycle to ensure a completely secure and
stable attachment.
6. Attach the bungie straps under tension to suitable, secure parts of the motorcycle frame,
such as a dedicated luggage hook or foot rest. Ensure that the front straps are tensioned towards the
front of the motorcycle and the rear straps are tensioned towards the back of the motorcycle. Note: when
under tension, bungees should not be stretched beyond their elasticity (approx. 175% of their original size).
7. Ensure that no part of the straps or bag can damage your motorcycle and that it does not rub
against any moving or hot parts of the motorcycle, thus causing it to fray, burn or otherwise weaken.
8. Some bags can be expanded vertically to create more capacity.
9. There are two Velcro loops on the base of some tailpacks and matching D-rings on the main bag.
Once the base is zipped on the loops should be passed through the D-rings and the Velcro attached to the
base of the bag. (Fig. A)
WARNING
•
Do not overload – maximum recommended loading capacity 5 kg (2 kg on M4R).
• Where provided, the rucksack feature should only be used when NOT riding the motorcycle. If used
when riding, it may cause severe injury and even death in the event of an accident.
•
It is the owner's responsibility to ensure that the luggage is attached in such a way that it does not
damage or put at risk the owner or any property of the owner.
• Do not exceed the UK legal speed limit. This product has only been tested for use at UK road legal speeds.
• Regularly check bungie cords for wear and replace if they show any signs of weakening or frictiondamage.
These can be purchased from your local dealer.
• Bungie cords should not be stretched beyond their
elasticity (approx. 175% of their original size).
PLEASE NOTE
• If the luggage is not attached securely, it may become detached
and fall into the back wheel, causing serious injury and even death
• Tailpacks must NOT be attached to motorcycle seat humps
They are only suitable for motorcycles with detachable seats
(under which the Velcro strap should be locked into place). The
Velcro strap should NOT be fastened underneath the rear body
work where it may come into dangerous contact with the rear
wheel.
• 1 Tailpack
• Integral Seatbelt
Fig. A
4
• 1 Pack of Webbing Straps
Tailpacks must be attached
to the pillion seat using the
integral seat-belt strap &
additional straps
