Idiomas disponibles
Idiomas disponibles
Set the frame (1) with a basket (2) on a flat surface with the handle upwards. Release the locking element (PIC.A), press the
folding button (PIC.W.I), and hold it while unfolding the pushchair's frame upwards (PIC.B) until you hear a characteristic
locking sound (PIC.C).
III MOUNTING AND DISMOUNTING OF FRONT WHEELS
Slide in the front wheels (3) into designated slots until you hear a locking sound (PIC.D). To release the wheel, press the
button and pull out the wheel (PIC.E.I). The pushchair has a pivoting front wheels system with an option of lock to ride
straight. To unlock, slide the lock up/down (PIC.E.II).
IV MOUNTING AND DISMOUNTING OF REAR WHEELS
Slide in the rear wheels (4) into a designated slots until you hear a locking sound (PIC.F ). To realease the wheel, press the
buton and pull out the wheel ( PIC.G).
WARNING! Before using the pushchair, make sure all wheels are
correctly fitted.
V USING THE BRAKE
The pushchair is equipped with a foot-operated parking brake. Press the brake with your foot. Once the lock sound is heard,
the brake is active (PIC.H). Unlocking happens after lifting up the brake lock (PIC.I).
VI ASSEMBLY/DISASSEMBLY OF THE SEAT AND HOOD
To mount the seat ( 7 ) slide it on the pushchairs frame until hearing a characteristic 'click' (PIC.J). The seat can be fitted
front or rear-way facing (PIC.K). To dismount the seat, press the buttons (PIC.L.I) on both sides and lift the seat up (PIC.L.II).
Begin the hood assembly by sliding the metal latches into the fixing point on the seat's frame (PIC.M.I). Correct locking is
signaled by a gentle click (PIC.M.II). Pull the fabric over the seat levers and secure the hood fabric with the four fasteners
on the seat backrest (PIC.N). To disassembly the hood, press the buttons on the pushchair's frame located from the inner
side of the hood hooks and take out the metal latches from the fixing (PIC.O)
CAUTION! Assemble the hood before using the pushchair.
VII BUMPER BAR ASSEMBLY
To assemble the bumper bar, slide it in on both sides of the frame until it locks (PIC.P). To disassemble the element. Press
the buttons on both sides of the guide and pull out the bumper bar (PIC. Q).
VIII SAFETY HARNESS
Adjust the safety harness (6) at every use to make sure the child is correctly secured.
The belts of this stroller are adapted to newborn babies. Always use the fastening system. To secure the child, slide the hip
belts into the shoulder straps (PIC.R) and connect them by creating a central buckle (PIC.S), and secure them with a magnetic
clamp until it locks (PIC.T.I). To release the belts, press the buttons on the center buckle ( PIC.T.II).
IX SEAT POSITIONS
The seat has four positions: lie-flat, two semi-reclining, and sitting, adjustable using the backrest adjustment lever (PIC.U).
X FOOTREST ADJUSTMENT
The footrest can be adjusted in one of five positions. Simultaneously press the buttons located on both sides of the footrest
and set in the chosen position (PIC.V).
XI PARENT HANDLE ADJUSTMENT
To adjust the parent handle, press the button located in the middle of the handle (PIC.W.I) and set the handle in a preferable
position. You can adjust the parent handle height on one of 4 levels (PIC.W.II).
XII CUP HOLDER, MOSQUITO NET AND RAIN COVER, BAG ASSEMBLY
Attach the cup holder to the pushchair's right side stem.
Pull over the mosquito net onto the seat (PIC.X.I) and to fix it, fasten the snaps on the back of the backrest (PIC.X.II).
Place the rain cover on the pushchair as shown on PIC.Y.
Hang the parent bag (13) on the handle using the hangers (PIC. AL-AM).
XIII FOLDING THE PUSHCHAIR
When folding the pushchair with the car seat or a carrycot, first, detach those elements from the pushchair's frame. The
pushchair can be folded with the seat fixed front or rear way facing. The pushchair has an upright position once folded- turn
the wheels in the opposite direction of travel and lock them using the straight-ahead travel lock button.
The pushchair can be folded in two ways:
Seat fitted facing the parent (PIC. Z) – set the backrest on a frame level (PIC.AA). To fold the frame, press the
folding button located on the handle and push the handle forward, holding the folding button according to
the PIC. 13.AB. until the latch locks on the stem (PIC.AC)
Seat fitted backward to the parent (PIC.AD)- set the backrest in the third position as shown on the PIC.AE). Lif
the footrest as shown on the PIC.AF. To fold the frame, press the folding button located on the handle and
push the handle forward, holding the folding button according to the PIC. 13.AG. until the latch locks on the
stem (PIC.AH)
XIV INSTALLATION OF ADAPTERS AND CAR SEAT
27
