Idiomas disponibles
Idiomas disponibles
CHANGING THE SANDING DISCS
WARNING: TURN THE POWER OFF AND REMOVE THE PLUG FROM THE OUTLET BEFORE CHANGING
THE ACCESSORIES.
CAUTION:
1. Remove mitre gauge and worktable assembly.
2. Remove the disc guard screws and disc guard.
3. Remove sanding disc from disc plate. Sanding discs are attached to the plate using a pressure-
sensitive adhesive.
4. Ensure the disc plate is clean.
5. Peel backing away from the new sanding disc.
6. Align perimeter of disc with plate and press disc firmly into position on plate, leaving no loose
edges.
7. Replace the disc guard, disc guard screws and worktable.
EN
SANDING DISCS CANNOT BE USED WITH THIS SANDER!
